4
Getting Started
1.Plug in the adaptor into a standard household outlet to
get the clock working firstly;
2.Insert 2 AA batteries(Not included) to preserve the time
and alarm settings in case of the power outage.
Please extend the FM antenna on the back of the clock.
1) If the display is “blank” after plugging in, please check
whether the DISPLAY DIMMER on the back is at the
HIGH position.
Note:
2) Under the battery power, the display will go blank and
preset alarm will not go off.
3) Once the battery is removed and with an interruption
of power, the time and alarm need to be reset when
the power.
To Next Page
Loading...