Need help?Do you have a question about the Bugera 6262 and is the answer not in the manual?
General| Power Output | 120 Watts |
|---|---|
| Channels | 2 |
| Preamp Tubes | 4 x 12AX7 |
| Power Tubes | 4 x 6L6 |
| Reverb | Yes |
| Effects Loop | Yes |
| Type | Tube Amplifier |
| EQ | Bass, Mid, Treble |
| Footswitch | Included |
| Footswitch I/O | 1 x 1/4" |
| Speaker Outputs | 4 Ohms, 8 Ohms, 16 Ohms |
| Dimensions | 700 x 250 x 250 mm (27.5 x 9.8 x 9.8 in) |
Guidance on unpacking, checking for damage, and storing the unit.
Instructions for registering your BUGERA equipment online for warranty.
Explanation of the controls and inputs on the front panel of the BUGERA 6260.
Details and connections found on the rear panel of the amplifier.
Description of the footswitch and its functions.
Information regarding the internal components and valve sockets.
Guidelines for service personnel regarding internal access and adjustments.
To Next Page
