Nivotemp NT-M
7 Service and repair
This chapter contains information on troubleshooting and correction should an error occur during operation.
Repairs to the unit must be performed by Bühler authorised personnel.
Please contact our Service Department with any questions:
Tel.: +49-(0)2102-498955
or your agent
If the equipment is not functioning properly after correcting any malfunctions and switching on the power, it must be inspected
by the manufacturer. Please send the equipment inside suitable packaging to:
Bühler Technologies GmbH
- Reparatur/Service -
Harkortstraße 29
40880 Ratingen
Germany
Please also attached the completed and signed RMA decontamination statement to the packaging. We will otherwise be unable
to process your repair order.
You will find the form in the appendix of these instructions, or simply request it by e-mail:
service@buehler-technologies.com
.
7.1 Spare parts and accessories
Accessories
Item no. Description
9144 05 0010 Connecting cable M12x1, 4-pin, 1.5 m, angular coupling and straight plug
9144 05 0046 Connecting cable M12x1, 4-pin, 3.0 m, angular coupling and straight plug
9144 05 0047 Connecting cable M12x1, 4-pin, 5.0 m, angular coupling and strands
12 Bühler Technologies GmbH BE100021 ◦ 03/2017
To Next Page
Loading...
