Vehicles are delivered programmed
in
Mode
5.
To
change to another mode, the ignition must be
off.
Then:
1.
Press and hold the driver’s power door lock switch
(located on the driver’s side door).
2.
Press the opened trunk button on the transmitter to
enter the programming mode. The transmitter will
remain in its current mode.
3.
Press the opened trunk button again. Each time the
opened
trunk
button is pressed, the horn will
chxp
and the transmitter will advance to the next mode.
4.
Release the power door lock switch.
This procedure changes the mode for only the
transmitter used to change
this
setting. The procedure
will need
to
be repeated for the second transmitter.
Personal Choice Features
The following list of features that
are
available
on
your
Riviera can be programmed to the driver’s preference
for each key
chain
transmitter.
0
Memory Door Locks:
This
feature programs your
door locks to automatically lock or unlock when
shifting in and out of
PARK
(P).
0
Security Feedback:
This feature provides feedback
to the driver when the vehicle receives a command
from the key chain transmitter.
0
Delayed Locking:
This feature lets the driver delay
the actual locking of the vehicle. When
all
doors
have been closed, the doors will lock automatically
after five seconds.
0
Perimeter Lighting:
When the
UNLOCK
button
on
the key chain transmitter
is
pressed, the headlamps,
parking lamps, back-up lamps and cornering lamps
will turn on
in
dark conditions.
For more detailed information and programming
instructions, refer to the Index for each individual
feature listed above.
2-10
To Next Page
Loading...
