Removing the Spare Tire and Tools
The equipment you will need is located in the storage
compartment on the passenger’s side, at the rear of the
vehicle.
1. Open the jack storage compartment by lifting up the
tab and pulling the cover off.
A. Jack
B. Wing Bolt
C. Jacking Instructions
D. Folding Wrench
E. Wing Nut
F. J-Hook
2. Remove the jack and jacking tools by turning the
wing bolt counterclockwise.
3. Separate the jack by lifting up the jack from the
bracket tab and remove the folding wrench from
the jack.
The tools you will be using include the jack (A),
folding wrench (B), wing nut (C), and J-hook (D).
5-78
To Next Page
Loading...
Need help?
General
