For second row outboard seating positions, the top
tether anchors are exposed and located at the rear of
the seat cushions. Be sure to use an anchor located
on the same side of the vehicle as the seating position
where the child restraint will be placed.
The anchor for the center position bench seat is located
on the floor behind the second row seats. If the
vehicle has the extended rear convenience center, you
need to lift the cover of the convenience center to
access the anchor for the center position bench seat.
Second Row Outside Position Bench Seat
Second Row Center Position Bench Seat without
Third Row Seat
1-60
To Next Page
Loading...
