Buick Cascada 2016 - Auxiliary Devices; Bluetooth Audio

Buick Cascada Owner Manual (GMNA-Localizing-U.S-9186636) - 2016 - crc -
10/21/15
164 Infotainment System
Auxiliary Devices
If equipped, this vehicle has an
auxiliary input jack in the center
stack. Possible auxiliary audio
sources include:
.
Laptop computer
.
MP3 player
.
Tape player
This jack is not an audio output. Do
not plug headphones into the
auxiliary input jack. Set up any
auxiliary device while the vehicle is
in P (Park).
Connect a 3.5 mm (1/8 in) cable
from the auxiliary device to the
auxiliary input jack. When a device
is connected, the system
automatically begins playing audio
from the device over the vehicle
speakers.
If an auxiliary device has already
been connected, but a different
source is currently active, do one of
the following:
.
Press SRCE to scroll all of the
available audio source screens,
until the AUX source screen is
selected.
.
Say “Play Front AUX” using
voice recognition to play the
auxiliary device. See Voice
Recognition 0 191.
.
Touch AUX on the Home Page.
Bluetooth Audio
If equipped, music may be played
from a paired Bluetooth device. See
“Pairing a Phone/Device” under
Bluetooth 0 197.
To play music through a Bluetooth
device :
1. Power on the device, pair, and
connect the device.
2. Music can be launched by
doing one of the following:
.
Touch Bluetooth on the
Home Page.
.
Press SRCE until Bluetooth
Audio is selected.
.
Press SRC on the steering
wheel controls until
Bluetooth Audio is selected.
See Steering Wheel
Controls 0 130.
.
Use voice recognition. See
Voice Recognition 0 191.
The music can be controlled by
either the infotainment controls or
the controls on the device.
When a phone is connected to the
system through Bluetooth Audio, the
phone notifications and sounds may
not be heard on the phone until
Bluetooth is disconnected.
Notification features may vary based
on the phone. Check the phone
manufacturer’s information for
notification support.
Bluetooth Audio Menu
Touch the Menu screen button and
the following may display:
Shuffle: Press the outer ring of the
Z knob to turn shuffle on or off.
Not all devices support the shuffle
feature.