Vehicle Care 279
5. Insert the bulb holder and turn
it clockwise.
6. Insert right end of the lamp,
slide to the right, and insert
left end.
Back-Up Lamps
1. The cover is inside of the trunk
lid. Remove the screw on the
cover with a tool and turn
clockwise to remove the cover.
2. Remove bulb holder by turning
counterclockwise.
3. Remove and replace the bulb.
4. Insert bulb holder into the
taillamp assembly and turn
clockwise.
5. Close the cover by inserting
the fastener clips first. Lock the
cover by turning the screw
clockwise with a tool.
Rear Position Lights
1. Open the trunk lid.
To Next Page
Loading...
