278 Vehicle Care
3. Turn the bulb socket 90°
counterclockwise and remove it
from housing.
4. Pull the bulb from the bulb
holder and replace it.
5. Re-insert the socket into the
housing and turn it 90°
clockwise.
6. Insert the sidemarker in
reverse order in the bumper
first, then gently push in the
clip on the side.
Side Turn Signal Lamps
1. Insert a tool between side turn
signal and fender. Place a cloth
between the tool and the
fender.
2. Push the tool to disengage the
clip and remove the side turn
signal lamp.
3. Turn the bulb holder
counterclockwise and remove
from housing.
4. Pull bulb from bulb holder and
replace it.
To Next Page
Loading...
