Keys, Doors, and Windows 41
4. With an additional person, lift
the tonneau cover from both
sides to approximately the half
raised position.
5. With the tonneau cover being
held in the half raised position,
insert the hex wrench into the
marked position of the flap
drive unit. Turn the wrench
clockwise to the stop. The
sideways flaps will turn inward.
6. With an additional person,
raise tonneau cover to the fully
open position.
7. Lift the convertible top by
pulling up on both sides of the
front bow and tension bow.
8. Move the front bow to the
windshield frame.
To Next Page
Loading...
