44 Keys, Doors, and Windows
4. Insert the right side pins into
the trim recesses.
5. Slightly fold the deflector at the
center hinge and insert the left
pins into the trim recesses.
6. Push center of the deflector
down to fully engage the pins.
7. Fold the front half of the
deflector to the vertical
position.
Reverse steps 1–7 to remove the
large wind deflector.
Stowing the Wind Deflectors
1. After stowing both deflectors in
the stowage bag, lower rear
seatbacks.
2. Insert top of bag in the stowage
compartment, align remainder
of bag to fit and secure with
straps.
Rollover Protection System
The rollover protection system
consists of a reinforced windscreen
frame and anti-roll bars under
covers behind the rear head
restraints.
To Next Page
Loading...
