Buick CASCADA 2018 - Cruise Control and Traction Systems; Setting Cruise Control; Adjusting Cruise Control; Traction Control and StabiliTrak

15
CRUISE CONTROL
TRACTION CONTROL AND STABILITRAK
®
SYSTEMS
Setting Cruise Control
1. Press the On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
rotate the thumbwheel down to the
SET– position to set the speed. The
symbol will illuminate in green on the
instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the thumbwheel up to resume a set speed. When the system is active, rotate and
hold the thumbwheel up to increase speed.
SET– Set/Coast
When the system is active, rotate and hold the thumbwheel down to decrease speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory. Pressing the
brake pedal also will cancel the cruise control.
The set speed is erased when cruise control or the vehicle ignition is turnedoff.
See Driving and Operating in your Owner’s Manual.
The traction control system limits wheelspin
and the StabiliTrak
®
stability control system
assists with directional control of the vehicle
in dicult driving conditions. Both systems
turn on automatically every time the vehicle
is started. Turn off traction control if the
vehicle is stuck and rocking the vehicle is
required.
Press the Traction Control/
StabiliTrak Off button on the center of
the instrument panel to turn traction
control on or off.
See Driving and Operating in your Owner’s Manual.