17
AUTOMATIC TRANSMISSION
Driver Shi Control
Driver Shi Control is a manual mode that
allows the driver to shi gears manually.
Thisfeature can be used to drive the vehicle
in a sportier manner, or to downshi when
driving on a downhill grade to provide
engine braking.
1. Move the shi lever le to the +/–
position.
2. Tap the shi lever forward (+) to upshi
or rearward (–) to downshi. The current
gear will be displayed on the Driver Information Center.
If vehicle speed is too high or too low for the requested gear, the shi will not occur. When
coming to a stop, the transmission will downshi automatically.
See Driving and Operating in your Owner’s Manual.
TIRE PRESSURE MONITOR
REFUELING THE VEHICLE
The
Low Tire Pressure warning light on the instrument cluster illuminates when one or
more of the vehicle’s tires is signicantly underinated. Fill the tires to the proper tire pres-
sures listed on the Tire and Loading Information label located below the driver’s door latch.
Current tire pressures can be viewed on the Driver Information Center.
See Vehicle Care in your Owner’s Manual.
1. To unlock the fuel door, unlock the vehicle
using the power door lock button or the
Remote Keyless Entry transmitter.
2. Press and release the center of the rear
edge of the fuel door. It will pop out slightly.
Pull the door open.
See Driving and Operating in your Owner’s Manual.