Setting the Time
Your vehicle has an analog clock as well as the digital
radio clock. If you decide to use the digital radio clock as
well as the analog clock, you can change the setting to
enable the radio clock display.
Enabling/Disabling the Digital
Radio Clock
For Radios with a Single CD or a
Single CD and DVD Player
Turn the radio clock display on or off by following
these steps:
1. Press the
H (clock) button until the clock and date
setting menus appear.
2. Press the pushbutton located under the forward
arrow label until the menu for default clock and
date settings appear.
3. Press the pushbutton located under the currently
displayed status of either ON or OFF. The ON
display indicates the radio clock display is disabled
and the OFF display indicates the radio clock
display is enabled. Press this pushbutton to toggle
the radio clock display on or off.
If the radio clock display is turned on, the screen
displays Radio Clock ON for 10 seconds, then
returns to the original clock display menu.
If the radio clock display is turned off, the
screen displays Radio Clock OFF for 10 seconds.
The menus for clock and date settings are removed,
and ON displays as a current status indicating that
the clock display can be turned on, if desired.
The radio clock and analog clock are not synchronized.
Occasionally you might need to set the digital radio
clock using the procedure below to synchronize
both clocks.
3-75
To Next Page
Loading...
Need help?
General
