Manual Lumbar
If your vehicle has this
feature, the handle is
located on the inboard
side of the seatback.
Turn the handle rearward to decrease lumbar support.
Turn the handle forward to increase lumbar support.
You may need to adjust the lumbar support whenever
you change your seating position.
Power Lumbar
If the seats have power lumbar, the controls used to
operate this feature are located on the outboard side of
the seats. See Power Seats on page 1-2 for more
information.
• To increase lumbar support, press and hold the
front of the control.
• To decrease lumbar support, press and hold the
rear of the control.
• To raise the height of the lumbar support, press
and hold the top of the control.
• To lower the height of the lumbar support, press
and hold the bottom of the control.
Release the control when the lower seatback reaches
the desired level of lumbar support.
You may need to adjust the lumbar support whenever
you change your seating position.
1-3
To Next Page
Loading...
Need help?
General
