For a Radio with a Six-Disc CD Player
This type of radio has a MENU button for setting the
time and date. To set the time and date, do the
following:
1. Press the MENU button until the
H (clock) label
option is displayed.
2. Press the pushbutton located under the
H label
and the HR, MIN, MM, DD, YYYY (hour, minute,
month, day, and year) displays.
3. Press the pushbutton located under any one of
the labels that you want to change. Every time
the pushbutton is pressed again, the time or
the date if selected, increases by one.
• Another way to increase the time or date, is to
press the
¨ SEEK arrow or the \ FWD
(forward) button.
• To decrease the time or date, press
the
© SEEK arrow or the s REV (reverse)
button. You can also turn the
f (tune) knob,
located on the upper right side of the radio
faceplate, to adjust the selected setting.
Changing the Time and Date Default
Setting
For Radios with a Single CD or a
Single CD and DVD Player
To change the time and date default setting, do the
following:
1. Change the time default setting from 12 hour to
24 hour or the date default setting from month/day/
year to day/month/year, by pressing the
H (clock)
button.
2. Once the clock and date settings display along with
the forward arrow, press the pushbutton located
under the forward arrow until the time 12H and 24H,
and the date MM/DD/YYYY (month, day, and year)
and DD/MM/YYYY (day, month, and year) displays.
3. Press the pushbutton located under the desired
option, then press the
H button again to apply
the selected default, or let the screen time out.
3-77
To Next Page
Loading...
Need help?
General
