1-8 In Brief
.
Raise or lower the entire seat by
moving the control (A) up
or down.
See Power Seat Adjustment on
page 3�5 for more information.
To raise or r e c l i n e t h e seatback, tilt
the top of the control (B) forward or
rearward. See Reclining Seatbacks
on page 3� 6.
Press the front or rear of the
control (C) to increase or decrease
lumbar support. Press and hold the
top or bottom of the control (C) to
raise or lower lumbar support. See
Lumbar Adjustment on page 3�5.
Heated Seats
Uplevel Buttons Shown, Base
Buttons Similar
If available, the buttons are on the
climate control panel. To operate,
the ignition must be on.
Press
M or L to heat the driver or
passenger seat cushion and
seatback. Indicator lights on the
button or on the climate control
display show the current setting.
See Heated Front Seats on
page 3�7 for more information.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a c o m f o r t a b l e seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
For more information see Head
Restraints on page 3� 2 and Seat
Adjustment on page 3� 4.
To Next Page
Loading...
