Buick Regal - Button; Storing the Tire Sealant and Compressor Kit

Black plate (82,1)
Buick Regal Owner Manual - 2012
10-82 Vehicle Care
The tire sealant and compressor kit
has an accessory adapter located in
acompartmentonthebottomofits
housing that may be used to inflate
air mattresses, balls, etc.
Removal and Installation of the
Sealant Canister
To remove the s e a l a n t canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
Storing the Tire Sealant
and Compressor Kit
To access the t i r e sealant and
compressor kit:
1. Open the trunk. See Trunk on
page 2�11.
2. Lift the cover.
With Pressure Relief Button
With Pressure Deflation Button