Buick Regal - Page 208

Black plate (44,1)
Buick Regal Owner Manual - 2012
7-44 Infotainment System
Using the “Store” Command
1. Press
b / g.Thesystem
responds “Ready,” followed by
atone.
2. Say “Store.”
3. Say the phone number or group
of numbers you want to store all
at once with no pauses, then
follow the directions given by the
system to save a name tag for
this number.
Using the “Digit Store” Command
If an unwanted number is
recognized by the system, say
“Clear” at any time to clear the last
number.
To hear all o f the numbers
recognized by the system, say
“Verify” at any time.
1. Press
b / g.Thesystem
responds “Ready,” followed by
atone.
2. Say “Digit Store.”
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered, say
“Store,” and then follow the
directions given by the system to
save a name tag for this number.
Using the “Delete” Command
1. Press
b / g.Thesystem
responds “Ready,” followed by
atone.
2. Say “Delete.”
3. Say the name tag you want to
delete.
Using the “Delete All Name Tags”
Command
This command deletes all stored
name tags in the Hands�Free
Calling Directory and the
Destinations Directory.
To delete all n a m e tags:
1. Press
b / g.Thesystem
responds “Ready,” followed by
atone.
2. Say “Delete all name tags.”
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the “List” Command
1. Press
b / g.Thesystem
responds “Ready,” followed by
atone.
2. Say “Directory.”
3. Say “Hands�Free Calling.”
4. Say “List.”
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.