Page | 8
HEAT PUMP OPERATION / DIGITAL CONTROL OPERATION
To turn the heater off:
• Press & release the set button four times until “OFF” appears.
• Press up arrow twice until “OFF” appears.
• Heater is now OFF.
• Pool & Spa lights will not be illuminated beside the display indicating heater is off.
To turn heater on:
• Press & release the set button four times until “OFF” appears.
• Press down arrow twice until “ON” appears. Heater is now on.
• Pool & Spa lights will illuminate beside display indicating heater is on.
• Use the up or down arrows to set desired temperature.
CAUTION! When the control is in the “OFF”
mode, there is still high voltage to the unit. If
you want to turn the unit off for long periods of
time, shut the main power off to the unit at the
main or service disconnect.
To Next Page
Loading...
