22
window. Press , “F/C” will appear. Press several times
until “CLN—UP” displays in the window. Press , the current
duration of the cycle will begin to ash in the window. Choose
a duration time from 0.0 hours to 4.0 hours, by pressing or
until the desired time displays in the window. Press to
conrm your selection.
NOTE: e Preferences Menu may list “DOL-PHIN” as an
option. However this function is not used in R-Series spas.
Stereo Controls (Optional)
If your spa is equipped with an “Elite” Audio system, refer to its
separate manual for operating instructions. If your spa has a “Life”
Audio system, the spa’s R600 control pad turn the audio system’s
Bluetooth function On and O.
e rst time you use your Bluetooth device with a Life Audio
system you must rst “pair” your device to the spa audio system.
Each device must be paired separately.
Turn on your Bluetooth device and place within 20 feet (6
meters) of your spa. e device must have “line of sight” to the
spa control panel / equipment door area.
NOTE: Certain house construction materials and other
obstructions can impair Bluetooth connectivity. You may need to
experiment with where to place your BT device for best results.
To turn on Bluetooth
Press several times until “BT” appears in the display window.
Press to activate Bluetooth. After approximately 15-20
seconds, “PPGME60” will appear in the Bluetooth list of your
electronic device. Select “PPGME60” from the list to connect and
“pair” your device to the Life Audio system. After a few seconds
the pairing will complete and audio from your device will start
playing on the spa audio system. Your Bluetooth devices need
only be paired the rst time you use a new device. After that your
device will connect automatically.
To Next Page
Loading...
