To Next PageTo Next PageHow to resolve error codes when installing Bunker Hill Security 62463 software?
Error codes during software installation for your Bunker Hill Security DVR can occur due to: * Interference from antivirus or firewall programs. Follow the instructions for your antivirus or firewall program to resolve the interference. * Incompatibility with your operating system. Check the System Requirements to ensure your operating system is supported.
Why is there no image in Live View on my Bunker Hill Security DVR?
If you're not seeing any images in Live View on your Bunker Hill Security DVR, here are a few things to check: * Ensure that 'Covert' mode is disabled in the Monitor Settings. * Verify that all cable connections are secure and correctly placed. * If you're using longer cables, make sure your power adapter provides sufficient amperage. * Adjust your monitor's image settings.
How to stop my Bunker Hill Security DVR from beeping?
Your Bunker Hill Security DVR might be beeping for several reasons: * A camera might be unplugged. Check the camera connections at both the DVR and the camera itself. * The hard drive could be full. You can resolve this by going to Device > HDD and setting 'Overwrite' to Auto. * The hard drive may be damaged. In this case, have a qualified technician repair the DVR.
What to do if my Bunker Hill Security DVR remote won't work?
If your Bunker Hill Security DVR remote isn't working, try these solutions: * Replace the batteries. * The controls might be locked. Unlock them by pressing and holding the REW button on the front of the DVR until it beeps, or by pressing the 0 button on the remote control.
How to fix a Bunker Hill Security 62463 that freezes?
If your Bunker Hill Security DVR is freezing, it might be due to a hard drive issue. Unplug the DVR, wait 30 seconds, and then plug it back in to see if that resolves the problem.
What to do if the Bunker Hill Security DVR mouse won't work?
If the mouse isn't working with your Bunker Hill Security DVR, the controls might be locked. Try unlocking them by pressing and holding the REW button on the front of the DVR until the unit beeps, or by pressing the 0 button on the remote control.
What to do if Bunker Hill Security DVR buttons won't work?
If the buttons on your Bunker Hill Security DVR aren't working, it could be because the controls are locked. You can unlock them by pressing and holding the REW button on the front of the DVR until the unit beeps, or by pressing the 0 button on the remote control.
Key safety warnings and instructions for safe operation of the DVR system.
Detailed technical specifications for the 8-Channel Surveillance DVR unit.
Detailed technical specifications for the surveillance cameras.
Identification and functional description of buttons and indicators on the DVR's front panel.
Identification and functional description of all ports and connectors on the DVR's back panel.
Steps for connecting the monitor, cameras, mouse, and power supply to the DVR.
Explanation of the live camera feed display, indicators, and basic navigation.
Setting the system's date, time, language, and video format.
Setting up user accounts, passwords, and access levels for security.
Configuring schedules for continuous, motion-triggered, and manual recording.
Adjusting video resolution, frames per second, and bitrate for recordings.
Finding, selecting, and playing back recorded video segments.
Procedures for saving recorded footage from the DVR to a USB flash drive.
Procedures for formatting the DVR's internal hard drive and USB flash drives.
Configuring monitor output, view modes, and resolution settings.
Synchronizing the DVR's clock automatically using NTP server.
Blocking specific areas within camera views from being recorded or displayed.
Configuring motion detection sensitivity, trigger areas, and recording behavior.
Solutions for common issues like beeping sounds and lack of live view images.
Solutions for DVR freezing, unresponsive remote, mouse, or buttons.
General| Model | 62463 |
|---|---|
| Operating System | Embedded Linux |
| Remote Access | Yes |
| Video Compression | H.264 |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Type | DVR |
| Audio Input | 4 RCA |
| Audio Output | 1 RCA |
| Hard Drive Support | 1 SATA |
| Network Connectivity | RJ45 (Ethernet) |
| Mobile Access | Yes (via app) |
| Operating System Compatibility | iOS, Android |
