Bunker Hill Security 69643 - User Manual

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2012 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
ITEM 69643
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com

Summary

Manual and Safety Guidance

Save This Manual

Keep this manual and the receipt in a safe place for future reference.

Critical Safety Warning

Read this material before using the product to avoid serious injury.

Safety Symbols and Definitions

Important Safety Information

Additional Safety Precautions

Personal Protection and Safe Practices

Guidelines on dressing, eye protection, and maintaining proper footing and balance.

Operational Safety and Battery Handling

Rules for battery disposal, qualified servicing, and avoiding impairment from substances.

Product Specifications and Setup

Product Specifications

Technical details of the lamp, battery pack, solar panel, detection range, and delay time.

Installation Guide

Step-by-step instructions for mounting the solar panel and lamp, and connecting the power cord.

Product Functions and Components

Component Identification

Identifies and labels the key parts of the 60 LED Solar Security Light system.

Operating Instructions

Initial Battery Charging

Steps for charging the batteries by allowing 3 days of full sunlight with the power switch OFF.

Power Switch Settings

Explains the OFF, ON, and AUTO settings for the power switch located under the battery housing.

Motion Detector Control Knobs Explained

Introduces the SENS, TIME, and LUX knobs for adjusting sensor behavior and light duration.

Motion Detector Control Adjustments

LUX (Light Level) Adjustment

How to set the darkness level required for the light to turn on automatically.

TIME (Light Duration) Adjustment

How to set how long the light stays illuminated after motion is no longer detected.

Motion Detector Sensitivity and Testing

SENS (Sensitivity) Adjustment

How to adjust sensitivity to detect different types of motion and environmental conditions.

Testing the Light Function

Procedure to test the light's operation after setting controls and adjusting sensitivity.

Maintenance and Servicing

Cleaning and Inspection Guide

Instructions for inspecting and cleaning the product before and after use.

Troubleshooting Common Issues

Common problems with the security light and their likely solutions.

Parts List and Diagram Reference

Assembly Diagram

Limited 90 Day Warranty

Bunker Hill Security 69643 Specifications