Bunker Hill Security 95815

To Next Page

STEEL BOOK SAFE SMALL

Model

95815

STEEL BOOK SAFE LARGE

Model

95814

ASSEMBLY AND OPERATION INSTRUCTIONS

This gun safe does not meet the

safety standards for gun safes

speciﬁed in California Penal

Code Section 12088.2. It does

not satisfy the requirements of

Penal Code Section 12088.1,

which mandates that all

ﬁrearms sold in California be

accompanied by a ﬁrearms

safety device or proof of

ownership, as required by law,

of a gun safe that meets the

Section 12088.2 minimum safety

standards developed by the

California Attorney General.

Esta caja fuerte para pistolas no

cumple con las normas de seguridad

para las cajas fuertes para pistolas

especiﬁcadas en la Sección 12088.2

del Código Penal de California.

No satisface los requisitos de

la Sección 12088.1 del Código

Penal, que requiere que todas las

armas de fuego que se vendan en

California estén acompañadas por

un dispositivo de seguridad de armas

de fuego o prueba de propiedad,

como lo requiere la ley, de una caja

fuerte para pistolas que cumpla con

las normas de seguridad mínimas

elaboradas por el Procurador

General de California, especiﬁcadas

en la Sección 12088.2.

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL

WARNINGS AND INSTRUCTIONS BEFORE USE.

2007 by Harbor Freight Tools

or any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Main Page

Need help?

Do you have a question about the Bunker Hill Security 95815 and is the answer not in the manual?

This document describes the Bunker Hill Safes Steel Book Safe, available in two models: the Small Steel Book Safe (Model 95815) and the Large Steel Book Safe (Model 95814). These safes are designed to resemble ordinary books, providing a discreet storage solution.

Function Description:

The Steel Book Safe is a portable, secure container intended for storing small valuables. It features a 3-dial combination lock for secure closure. The design aims to blend in with other books on a shelf, making it less conspicuous than a traditional safe. It is important to note that these safes do not meet the safety standards for gun safes specified in California Penal Code Section 12088.2 and do not satisfy the requirements of Penal Code Section 12088.1 regarding firearms safety devices or proof of ownership for gun safes. Therefore, explosives or firearms should not be placed in this safe. The manufacturer, Harbor Freight Tools, is not responsible for the loss of any property stored within the safe due to theft, fire, or other circumstances.

Important Technical Specifications:

Small Steel Book Safe (Model 95815):

Overall Dimensions: 6-7/16"L x 8-3/8"W x 3"H
Interior Dimensions: 6-1/8"L x 7-7/8"W x 2-5/8"H
Lid Thickness: 0.116"
Box/Frame Thickness: 0.050"
Materials: Powder Coated Sheet Steel. Features one interior welded hinge and is cloth covered to simulate a common book.
Locking Mechanism: A 3-dial combination lock secured by two round head steel chromed rivets. The top lid has a double hook that connects with the combo lock for secure closure.
Net Weight: 2.4 Lbs.

Large Steel Book Safe (Model 95814):

Overall Dimensions: 8-3/16"L x 9-7/8"W x 3"H
Interior Dimensions: 7-7/8"L x 9-1/4"W x 2-5/8"H
Lid Thickness: 0.116"
Box/Frame Thickness: 0.050"
Materials: Powder Coated Sheet Steel. Features one interior welded hinge and is cloth covered to simulate a common book.
Locking Mechanism: A 3-dial combination lock secured by two round head steel chromed rivets. The top lid has a double hook that connects with the combo lock for secure closure.
Net Weight: 3.5 Lbs.

Both models come completely assembled. The product's appearance may differ slightly due to continuous improvements.

Usage Features:

Opening the Safe: To open the Book Safe, turn the Numbered Dial Lock on all three dials to the number ZERO (0-0-0). Then, lift the lid.
Setting the Combination:
1. With the safe open, locate the Push Lever on the backside of the Numbered Dial Lock (inside the Book Safe).
2. Remove the red cap covering the Push Lever.
3. Push the Push Lever "OVER and UP" from B position to A position.
4. Rotate the three Numbered Lock Dials to your desired personal numbers (e.g., birth date, address). Record your new combination in a safe place.
5. Do not disturb the new combination. Flip the Push Lever back into its original position from A position to B position.
6. Before closing the Book Lid, shut the lid and test to see if it is locked.
7. Once it is locked, and the Lid is secure, spin the dials to "any number" to discourage easy opening. Without the code, a thief cannot access the contents.
8. To change to a new combination, repeat steps 1 through 4.
Safety Warnings:
- Keep the work area clean to prevent injuries.
- Inspect for damaged parts before use; damaged parts should be repaired by a qualified technician.
- Ensure the safe operates properly and performs its intended function.
- Check for any broken or damaged parts or other conditions that may affect operation.
- Using non-original parts will void the warranty.
- Keep children away from the safe and its codes.
- Maintain the product with care, keeping it in a dry location and away from rain.
- Use the safe only for its designed purpose. Do not modify the product or use it for unintended purposes.
- Do not use the safe if under the influence of alcohol or drugs.
- Be aware that fingers could be slammed by the lid closing accidentally.
- Warning: No device is completely theft proof. This safe is not fire-proof or waterproof. Harbor Freight Tools is not responsible for lost or stolen articles.

Maintenance Features:

Protection: Protect the safe from moisture and wet conditions, as moisture can cause damage to the dial or corrosion of the steel.
Cleaning: Occasionally wipe the safe and dial clean with a soft, dry cloth or brush.
Lubrication: Occasionally apply a small amount of light oil or lock lubricant to the mechanical lock mechanism.

Warranty:

Harbor Freight Tools Co. provides a Limited 90 Day Warranty to the original purchaser, ensuring the product is free from defects in materials and workmanship for 90 days from the purchase date. The warranty does not cover damage due to misuse, abuse, negligence, accidents, repairs or alterations outside their facilities, criminal activity, improper installation, normal wear and tear, or lack of maintenance. The company is not liable for death, injuries, property damage, or incidental, contingent, special, or consequential damages. To claim warranty, the product or part must be returned with transportation charges prepaid, proof of purchase, and an explanation of the complaint. If the defect is verified, the product will be repaired, replaced, or a refund issued. If no defect is found or if the defect is outside the warranty scope, the customer bears the return cost.

For technical questions or replacement parts, contact Harbor Freight Tools at 1-800-444-3353.