3
McDonald’s
®
ICB SH
Quick Start Guide
Bunn-O-Matic Corporation
www.bunn.com
7. Connect brewer to water
source with supplied
water line.
NOTE: Located on lower,
back, right of unit.
TIP: Use a two person
lift, and a cart, to move
machine to installation
location.
1. Remove ICB SH brewer
from box and packaging.
NOTE: Pull box up.
3. Remove Brew Basket
from Parts box.
4. Locate all manuals
and literature.
Save in manager's office
for future reference.
5. The brewer is 32.8” tall x
23.4” deep by 11.8” wide.
6. Connect brewer to
power source (120/208,
3300W, 16 Amps).
NOTE: Allow at least
4” behind the brewer for
power cord clearance
and air flow.
10. Allow brewer to reach
brew temperature.
Approximately 15
minutes.
11. Remove 1.5 Gallon SH
Server from box.
(PN 27850.0214)
9. Allow brewer to fill
with water.
Approximately 10
minutes.
INITIAL SETUP - ICB SH Brewer
8. Push power switch up to
ON position.
NOTE: Located on lower,
back, left of unit.
2. Remove Parts box.
Remove all packaging
materials including blue
tape and cardboard from
equipment vent located
on back of machine.
Remove tape from USB
and legs.
To Next Page
Loading...
Need help?
General
