Why is my Bunn Coffee Maker coffee cold?
If your Bunn Coffee Maker is producing cold coffee, ensure the brewer is plugged in and the vacation switch on the side is turned on, allowing 15 minutes for the water to reach the correct temperature. For BX, GRX, and NHBX models, check that the warmer switch is in the “on” position. If you have a BTX model with a thermal carafe, pre-heating it will help keep your coffee warm longer.
What to do if Bunn NHBX Coffee Maker funnel is overflowing?
If your Bunn Coffee Maker's funnel is overflowing, make sure the lid is fully open. Note that the brewer isn't designed to hold water in the upper tray for a long time. Also, remove the top lid to check that the rocker arm is correctly snapped in place and the rubber stopper area is thoroughly cleaned.
How to fix Bunn NHBX not brewing?
If coffee is not coming out of your Bunn Coffee Maker, first ensure that the lid is closed. The brewer requires a minimum of 4 cups (20 oz) to start brewing. Also, inspect the sprayhead holes and clean them if needed. Deliming instructions are available.
General| Material | Stainless steel |
|---|---|
| Dimensions | 14.8" H x 7.1" W x 13.8" D |
| Weight | 9.6 lbs |
| Power | 1300 W |
| Brew Time | 3 minutes |
| Voltage | 120V |
| Water Tank Capacity | 5 gallons |
Explains how temperature, time, and turbulence create superior coffee flavor.
Steps to remove mineral deposits from the sprayhead and brewer using a deliming tool.
Monthly cleaning using vinegar to remove mineral deposits and ensure brewer performance.
To Next Page
