To Next PageTo Next Page
Need help?Do you have a question about the Bunn Sure Immersion 220 and is the answer not in the manual?
General| Brand | Bunn |
|---|---|
| Model | Sure Immersion 220 |
| Category | Coffee Maker |
| Language | English |
General warnings related to site setup and operation.
Details on connecting the water supply to the machine.
Requirements for water quality and filtration.
Specifics on the water line connection adapter and codes.
Safety precautions for electrical hookup.
Step-by-step instructions for connecting power.
Identifies the location of the power switch.
Installing drip tray, unlocking door, and setting up bean hoppers.
Securing hoppers, removing packing tape, connecting water/power, and turning on the machine.
Opening door, removing roller, and loading filter paper.
Sliding paper through guide, pulling through roller, and engaging roller drive.
Closing door, accessing service, advancing paper, and returning to home screen.
Scanning QR code, entering PIN, verifying MAC/IMEI, and activating.
Confirming activation status, signal strength, and cloud link via machine settings.
Connecting to Wi-Fi, logging into the BUNN service, and joining a network.
Navigating the carousel, selecting size, and the grinding process.
Steps for immersing, brewing, dispensing, and handling pauses/resets.
Activating ADA mode, using arrows, and selecting options.
Screens shown during operation (Grinding, Immersing, Brewing, Dispensing) and reset process.
Scanning QR code, opening web page, and selecting beverages.
Selecting drink size, entering code, placing cup, and enabling screen ordering lockout.
Placing cup, swiping card, checkout, and starting dispensing.
Connecting printer, navigating settings, and enabling the feature.
Generating barcode IDs automatically via the interface.
Manually entering barcode IDs for beverages using the keypad.
Setting prices for different beverage sizes using the keypad.
Selecting which fields to print on the barcode receipt.
Exporting barcode and price settings.
Inserting and removing a USB stick for settings.
Sending printer settings to the printer.
Accessing service, advancing paper, and opening the door.
Turning the take-up roller handle and pulling it away to remove the roll.
Recommended daily cleaning procedures for exterior and parts.
How to navigate to the service access screen for cleaning options.
Using the rinse tab for brew funnel and box, and handling pauses.
Preparing the system for cleaning using the clean tab.
Steps for removing loose grounds and continuing the cleaning cycle.
Adding a cleaning tablet to the funnel and completing the cleaning cycle.
Steps to remove the brew funnel for thorough cleaning.
Cleaning the funnel and reinstalling it correctly.
Navigating to active notices, viewing faults, causes, and solutions.
Viewing past events, dates, times, and machine states.
