Bunn ULTRA-1 User Manual

ULTRA-1
ULTRA-2
INSTALLATION & OPERATING GUIDE
BUNN-O-MATIC CORPORATION OF CANADA
280 INDUSTRIAL PARKWAY SOUTH,
AURORA, ONTARIO, L4G 3T9.
PHONE: (905) 841-2866 FAX: (905) 841-2775
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts
Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at
www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and
manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-263-2256.
45246.7000B 03/12 ©2011 Bunn-O-Matic Corporation

Bunn ULTRA-1 Specifications

General

Voltage	120V
Material	Stainless Steel
Number of hoppers	1
Refrigerant	R404A
Capacity	3 gallons
Electrical	120V~ 60Hz, 8.0 Amps

Summary

Bunn-O-Matic Commercial Product Warranty

Site Preparation Guidelines

Electrical Requirements and Cautions

Initial Setup Procedures

Internal Brixing System Setup

Brix Adjustment Instructions for Brixing System

Operating Controls for ULTRA-1

Operating Controls for ULTRA-2

Dispenser Usage Instructions

Using Granita-Type Products

Instructions for using granita-type products from the dispenser.

Using Cold Liquid Products

Instructions for using cold liquid products from the dispenser.

Dispenser Programming

Programming Switches Overview

Details on the hidden switches used for programming the dispenser.

Home Screen Display

Displays TIME, DATE, SERIAL NUMBER, and ASSET NUMBER toggling continuously.

Menu Function Index Navigation

Accesses programming functions via the GOURMET button for menu navigation.

Setting Dispenser Consistency

Adjusts ice consistency or auger torque for left and right sides of the dispenser.

Setting Time and Date

Sets the DATE (YY MM DD) and TIME (HR MIN SEC) for display on the home screen.

Setting Night and Day Time

Configures the dispenser's power down and chilling times for off-peak hours.

Install Date Recording

Records the date and time of installation permanently in memory.

Other Dispenser Recommendations

Preventive Maintenance Schedule

Recommended Cleaning Procedures

Assembly Following Cleaning

Steps for reassembling dispenser parts after cleaning and sanitizing.

Auto-fill Cleaning and Sanitizing

Auto-fill Cleaning Instructions (Brixing Pump)

Procedure for cleaning auto-fill systems with a brixing pump installed.

Auto-fill Sanitizing Instructions (Internal Brixing)

Procedure for sanitizing auto-fill systems with an internal brixing system.

User Notices and Warnings

Recommended Daily Cleaning