16 08/54070/0 (Issue 5)
Power Down:
To power down the product, the STANDBY button should be
held when on the normal operation screen for 10 seconds. The
shutdown screen will appear and using the scroll buttons, ‘Yes’
should be selected by pressing MENU. The unit will then
shutdown.
Tap function:
The tap can be changed between a controllable and
constant flow. For ‘Controllable’ flow, simply pull the
plastic handle towards you to dispense water and
release to stop, see image 1. If you turn the plastic
tap handle through 180 degrees, the tap will be in
‘Constant’ mode, see image 2. Now when you pull the
tap towards you, it will remain locked downwards in
an ‘open’ state until you lift the black handle back
upwards to stop. The tap function is the same on tap
models on both our Filtered and Unfiltered boilers.
Push Button function:
To operate the push button simply place a cup under dispense
nozzle, then press and hold the push button. When the button
is released the water will stop flowing.
To Next Page
Loading...
