Burke TRI-FLEX II Operational Manual

4 TRI-FLEX II BED - OPERATION MANUAL
Mechanical
Total Physical Length, End to End: 94”
Total Physical Width: 40.75”
Total Physical Weight: 575-lbs (w/o scale)
Total Shipping Weight: 650-lbs
Patient Surface Length: 86”
Patient Surface Width: 48”
Patient Surface Transport Width: 37”
Deck High: 28”
Deck Low: 14”
Maximum angle of head gatch elevation: 60 degrees
Maximum angle of upper foot gatch elevation: 24 degrees
Maximum angle of lower foot gatch decline: 26 degrees
Maximum angle of trendelenberg 12 degrees
Electrical
Input voltage: 120V AC, 60Hz
Current: 2.7 amperes
Output voltage: 28V DC
Classification: Class B 1P-54
Duty Cycle: intermittent operation/ 10%, 6-min/hr.
(2) Fuses in control box 5x20mm 1.6L250V Time-Lag fuse
(1.6A/250V)
Wickmann Series 19195 or equivalent
Scale (optional)
Accuracy: Overall= 1%
Weight Capacity: 1000-lbs/ 454.5-Kg
Power Requirement: 6x C-size Alkaline
Readings per battery set 8000 (approx)
Options and Accessories
In Bed Scale System
Trapeze
Dual Passage Assist
Manufactured by Burke, Inc.
1800 Merriam Lane
Kansas City, Kansas
Specifications

Burke TRI-FLEX II Specifications

General

Brand	Burke
Model	TRI-FLEX II
Category	Medical Equipment
Language	English