Burke TRI-FLEX II - User Manual

Other manuals for Burke TRI-FLEX II

Questions and Answers

Anthony ThompsonAug 10, 2025

What to do if my Burke Indoor Furnishing has no power?

J
Jose BowenAug 10, 2025
If your Burke Indoor Furnishing unit isn't getting power, here's what you should check: * Ensure the control unit is turned on and properly connected to a power source. * Verify the power cord is securely connected. * Confirm that the power source itself is working and switched on. * If there was a power outage, wait for the power to be restored. * Inspect the fuse and replace it with an equivalent one if it's blown.

Luke SloanNov 25, 2025

Why is my Burke Indoor Furnishing mattress not inflating properly?

L
larsonjohnNov 25, 2025
If your Burke Indoor Furnishing mattress isn't inflating or alternating correctly, there could be several reasons: 1. A hose might be disconnected. Ensure all hose connectors are securely connected and locked in place. 2. The air hose could be kinked or split. Check for and un-kink any hoses, or replace them if they are split. 3. There might be a major leak in the air cushions or overlay pad. Replace any leaking components. 4. The manifold could be kinked or split. Un-kink the manifold or replace it if split. 5. If the unit has power and the fuse is good, but the control unit doesn't turn on, send the unit back for repair. 6. If it's not alternating and there's a solenoid malfunction, send the control unit back to the factory for repair. 7. If there is no air due to a pump malfunct...

General