EasyManuals Logo

Burke TRI-FLEX II User Manual

Burke TRI-FLEX II
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
6 TRI-FLEX II BED - OPERATION MANUAL
Hand Pendant Controls
PN62327 HBWO 75-XXX
The pendant controls all bed functions.
Thependantsymbolsaredenedasfollows:
HEAD GATCH - UP/DOWN
adjusts upper body for patient comfort
KNEE GATCH - UP/DOWN
adjusts knees for patient comfort
FULL BED HI/LOW - UP/DOWN
adjusts bed height for transfer and/or other patient care
return to full down when patient is unattended
TRENDELENBERG - UP/DOWN
adjusts full bed for trendelenberg function
HEAD/KNEE - UP/DOWN
both head and knee gatch work simultaneously
TRI-FLEX II
BY BURKE, INC.
POWERED BY LINAK
WARNING: 454kg./1,000LBS.patientuseWEIGHT LIMIT.
Never exceed maximum load capacity of the bed.
WARNING: Do not store or place items under the bed that could interfere
with bed function.
WARNING: Thisbedistobecleanedanddisinfectedbeforerstuse
and after each usage, or when the bed is contaminated.
(see cleaning and
disinfecting p.16)
WARNING: All bed functions should be tested for correct performance
prior to use.
WARNING: When bed is in use, the CASTERS must be positioned so
that the tabs are locked and pointed towards the foot end of the bed.
•WARNING: All persons with access to the bed must read the entire
manual before using the bed.They should be familiar with the informa-
tion and all procedures described in it.
!
Important Safety Information
!

Other manuals for Burke TRI-FLEX II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Burke TRI-FLEX II and is the answer not in the manual?

Burke TRI-FLEX II Specifications

General IconGeneral
BrandBurke
ModelTRI-FLEX II
CategoryMedical Equipment
LanguageEnglish