TRI-FLEX II BED - OPERATION MANUAL 1
TRI-FLEX
™
II BED
OPERATIONAL MANUAL
Overview
This electric hospital bed is intended for use in an institu-
tional environment whenever a patient’s weight and/or over-
all size exceeds existing unit limitations or patient’s weight
exceeds that which the staff can care for without reducing
the quality of service or endangering the safety of patient
and staff. This patient weight includes anyone over 181 kg. /
400lbs.butnottoexceed455kg./1000lbs.
The Tri-Flex II bed is multi-purpose capable. The patient sur-
face can be raised or lowered to facilitate patient care. The
bed has Trendelenberg and Reverse Trendelenberg function
in the pendant as well as “Cardio-Chair” positioning.
The Tri-Flex II system can also facilitate patient transport.
The two foot end casters contain steering lock ability which
provides directional control during transport.
NOTE: This manual covers the use and functions of the
basic bed. Instructions for various options and accessories
will be covered in supplemental literature provided with those
accessories. SEE ALSO:
Impulse Drive Manual
Low-Air-Loss Mattress Manual
Barri-Float Foam Mattress Manual
Scale System Manual
Operating Precautions
Before operating this bed ensure that you have read and un-
derstood in detail the content of this manual. It is important
that you read and strictly adhere to the safety information
contained in this manual. This product is intended for indoor
use at room temperatures with intermittent operation consis-
tent with the stated duty cycle of the device.
Any reference to a side of the bed is from the patient’s view-
point, lying in the bed on their back.
Introduction
!
To Next Page
Loading...
Need help?
General
