Burley FLATBED - Hitching the Burley Flatbed to Your Bicycle; Attaching the Hitch to Bicycle Stays; Safety Strap Installation

BURLEY.COM
6
ASSEMBLY & USE
ENG DEU FRA ESP
ASSEMBLY & USE
for TOC, do not delete. box must not extend to pages edges. don't forget to also add it to your pages panel
Mount clear reflectors/brackets horizontally
on front corners of side panel rail tubes.
Mount red reflectors/brackets horizontally
on rear corners of side panel rail tubes
1
Mounting the Reflectors
Slide end of side rail into side rail mount and
secure using lockpin. Repeat for all four corners.
Slide tow bar into receiver
on left side of trailer.
Remove side rail lockpins, remove side rails
from side rail mounts, and fold flat.
Insert lock pin through holes. Close
retainer to secure lock pin.
1
1
1
2
Unfolding Your Trailer Folding Your Trailer
Installing the Tow Bar