7 8
159 MONO POWER AMPLIFIER
2|8
7. Insert the supplied straps into the recesses in the corner rails and tighten them.
8. Two lifting bars form a pair and can be slid into each other. Insert two matching lifting
bars into the openings in the corner rails from both sides and push them together as
far as they will go.
9. Secure the two parts with the supplied locking pin.
10. Lift the device out of the bottom of the flight case with 4 people using the 4 handles
on the lifting bars. Do not try to lift the device with 2 people.
11. Have a fifth person remove the bottom of the flight case. This person must not reach
under the raised device!
12. Carefully set the device down in the installation location.
13. Remove the lifting equipment by performing assembly steps 6–9 in reverse order.
14. Remove the protective cover from the device.
15. Repack the lifting equipment and the protective cover in the flight case and save it
for later transport.
FOLLOW THE INSTRUCTIONS IN THE OPERATION MANUAL WHEN CONNECTING AND STARTING UP
THE 159.
To Next Page
Loading...
Need help?
General
