5 8
159 MONO POWER AMPLIFIER
2|8
Setting Up the Device
ARRANGE FOR A SKILLED PERSON TO CARRY OUT THIS STEP!
1. Open the top section of the flight case.
(When a pair of 159s is delivered, one flight case contains the operation manual,
warranty documents and the care kit, while the other flight case contains the
lifting equipment.)
2. Remove all parts of the lifting equipment. It consists of 4 corner rails,
2 straps and 2 two-part lifting bars with a split pin for locking.
3. Re-close the top section of the flight case.
4. Open the bottom latches on the flight case and, with two people,
carefully remove the lid by lifting it upwards.
5. With the device still in the base of the flight case, roll it to the desired
installation location.
6. Attach the corner rails of the lifting equipment to the device as shown in the figure.
You can mount the corner rails such that the lifting bars can be inserted either
lengthwise or crosswise, depending on which option seems more practical at the
installation location.
TO PROTECT THE AMPLIFIERS HOUSING FROM SCRATCHES DO NOT REMOVE THE PROTECTION
COVER DURING SETUP!
To Next Page
Loading...
Need help?
General
