Burmester 911 MK 3 User Manual

OWNER’S MANUAL
POWER AMP
911 MK 3
HIGH END MADE IN GERMANY
BURMESTER AUDIOSYSTEME GMBH · KOLONNENSTR. 30 G · 10829 BERLIN · GERMANY
PHONE + 49/30/78 79 68 - 0 · FAX + 49/30/78 79 68-68 · E-MAIL: mail@burmester.de, www.burmester.de

Burmester 911 MK 3 Specifications

General

Brand	Burmester
Model	911 MK 3
Category	Amplifier
Language	English

Summary

Component Identification

Front Panel Controls

Identifies the STAND-BY LED, POWER button, and POWER LED on the front panel.

Rear Panel Connections

Details inputs, outputs, AC switch, input terminals, and remote IN on the rear panel.

Wiring Diagrams

Stereo, Mono, and Bi-Amping Wiring

Illustrates connections for stereo, bridged mono, and bi-amping operations of the power amplifier.

Accessories

Adapter Plugs (XLR-RCA)

Explains the use of adapter plugs for connecting unbalanced cables to balanced input terminals.

Start-Up Procedure

Initial Setup and Connections

Covers standard supply, packaging, positioning, connecting the amp, and AC voltage selection.

Input/Output and Remote Control

Details connecting inputs, outputs, and setting up remote control functionality.

Operation and Hook-Up

Connecting AC Power and Controls

Covers AC connection, mains switch, and front panel controls for operation.

Stereo, Mono, and Bi-Amping Configurations

Details specific connection configurations for stereo, mono, and bi-amping modes.

Protection and General Advice

Protection Circuitry Details

Explains the amp's protection mechanisms against overheating, DC offset, and overloading.

Safety, Cables, and Fuses

Covers lightning precautions, cable recommendations, fuse access, and safety.

Technical Specifications

Dimensions and Weight

Provides the physical dimensions and weight of the power amplifier.

Power Consumption

Lists power consumption figures for stand-by, idling, and maximum operation.

Fuse Specifications

Details the fuse ratings for 230V and 115V settings.