41
8. Insert the T-gliders into the guide located on
one side panel.
9. Lower the frame.
10. Fold in the connected side panel.
11. Lift the unattached side of the frame slightly
and tilt the standing side panel so that the
T-glider and side panel fall into position.
CONNECTING THE GAS CARTRIDGE
Fire and explosion hazard
• The following parts are included in delivery. They
comply with the standard applicable to the res-
pective country of delivery:
• Gas hose with valve and nozzle
1. ATTENTION: before assembling, make sure
that the gas valves have been completely shut
off!
To Next Page
Loading...
