Need help?Do you have a question about the Burson Soloist Voyager V-220 and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion (THD) | < 0.001% |
| Signal-to-Noise Ratio (SNR) | >120dB |
| Input Impedance | 10k Ohm |
| Output Impedance (Pre-Out) | 100 Ohm |
| Inputs | RCA, XLR |
| Outputs | 6.35mm Headphone Jack |
| Dimensions | 210 mm x 230 mm x 80 mm |
| Power Supply | Internal |
| THD+N | < 0.001% |
To Next Page
