EasyManua.ls Logo

Burson Soloist 3X Performance - User Manual

Burson Soloist 3X Performance
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Burson Soloist 3X Performance (M-120X)
Headphone Amplifier / Pre Amplifier
User Manual
Register for warranty Ref. page 6 for details
Question and Answer IconNeed help?

Do you have a question about the Burson Soloist 3X Performance and is the answer not in the manual?

Summary

Introduction

Thank You

Expression of gratitude and congratulations on purchasing the Burson Soloist 3XP.

Company Philosophy

Details Burson Audio's core design philosophy of transparent sound reproduction.

Connectivity

XLR to RCA Output

Explains direct coupling and incompatible adapters, warning about potential damage.

Initial Setup

Unpacking Guide

Instructions for inspecting the unit for shipping damage and saving packing materials.

Basic Setup

Setup Steps

Provides four easy steps to connect and power up the Burson device.

Product Overview

Front and Remote Controls

Details the front panel and remote controls including volume, mute, input select, and power.

Input and Output Connections

Identifies all input and output ports on the rear panel and front combo jack.

Operation and Maintenance

Break-in, Warm-up, and Caring

Advice on sound improvement over time and proper handling to prevent damage.

Headphone Power Amp Mode

Instructions on how to enter and exit the bypass mode for volume control.

Customization

Opamp Change & Upgrade

Information on changing opamps and required precautions for customization.

First Use and Warranty

Initial Powering Up

Guidance on powering on the unit and system for the first time.

Warranty Information

Details on free warranty extension and the conditions of the product warranty.

Burson Soloist 3X Performance Specifications

General IconGeneral
TypeHeadphone Amplifier
Input Impedance10kΩ
Gain SettingsLow, Medium, High
Inputs1 x RCA, 1 x XLR
Outputs1 x 6.35mm Headphone, 1 x XLR

Related product manuals