BUSCH Mink MM 1202 AP User Manual (English)

Other manuals for BUSCH Mink MM 1202 AP

Questions and Answers:

sandrafigueroaSep 12, 2025

What to do if BUSCH Air Compressor doesn't reach usual pressure?

M
Matthew AvilaSep 12, 2025
If your BUSCH Air Compressor isn't reaching its usual pressure, several factors could be at play. Check if the inlet screen is partially clogged and clean it if necessary. Similarly, the inlet filter cartridge might be clogged and require replacement. Ensure the pressure system connection is leak-tight by inspecting the hose or pipe connections. The pressure relief valve might also be improperly adjusted or defective, requiring adjustment, repair, or replacement. A clogging in the discharge line can also be the cause, so remove the clogging. If none of these steps resolve the issue, the internal parts may be worn or damaged, requiring you to repair the machine (contact Busch).

Gilbert CampbellSep 14, 2025

Why is my BUSCH Air Compressor overheating?

C
Christina RobbinsSep 14, 2025
If your BUSCH Air Compressor is running too hot, several factors could be the cause. Insufficient cooling could be the problem, so remove any dust and dirt from the machine. Check if the oil level is too low and top up the oil if needed. Also, the ambient temperature or the temperature of process gases at the inlet may be too high. Observe the permitted ambient and gas inlet temperatures (see Technical Data).

Brand

Model

Mink MM 1202 AP