Need help?Do you have a question about the BUSCH MINK MV 0312 B and is the answer not in the manual?
General| Brand | BUSCH |
|---|---|
| Model | MINK MV 0312 B |
| Category | Water Pump |
| Language | English |
Explains the claw principle and air-cooling mechanism of the MINK vacuum pump.
Details intended use for dry, non-aggressive gases and non-explosive environments.
Notes that start controls are not included and must be provided during installation.
Lists standard features like the vacuum relief valve and oil sight glass.
Describes optional accessories such as the inlet filter available for the pump.
Specifies environmental and space requirements for safe and efficient pump installation.
Covers requirements for suction and discharge connections, including material and stress.
Provides instructions and warnings for filling the vacuum pump with the correct type of oil.
Outlines safety precautions and procedures for connecting the pump's electrical system.
Details specific procedures for using the Aqua version to convey condensable vapours.
Presents intervals and tasks for regular maintenance, dependent on operating conditions.
Describes how to check the oil level and indicates potential issues if it drops.
Explains how to clean ventilation grilles, cooling fins, and inlet screens.
Details the procedure for changing the oil, emphasizing the correct oil type.
Provides instructions for safely dismantling and disposing of the machine.
To Next Page