To Next PageTo Next Page
Need help?Do you have a question about the BUSCH R5 RA 0255 D and is the answer not in the manual?
General| Motor rating | 7.5 kW |
|---|---|
| Ultimate pressure | 0.1 mbar |
| Type | Rotary vane vacuum pump |
| Pumping speed | 255 m³/h |
| Motor power | 7.5 kW |
| Voltage | 230/400 V |
| Frequency | 50/60 Hz |
| Inlet connection | G 2 |
Connect the cable of the remote control to the M12 interface socket.
Start the PC-Software setup from the USB stick or download from the Busch website.
Fit the Bluetooth stick to the M12 interface socket.
Guide to operating the remote control, covering key overview and navigation.
Details the remote control menu structure and its Standard/Expert modes.
Overview of advanced parameters accessible in Expert Mode.
Instructions and precautions for starting and stopping the machine.
Information on alarm trip settings and typical wiring for Cobra and R5 machines.
Instructions on how to safely de-energise the variable speed drive.
Procedure for backing up current parameters using PC-Software.
Steps to restore the drive controller to its factory default settings.
Diagram and specifications for the variable speed drive's input/output terminals.
Guidelines for proper wiring to minimize electromagnetic interference.
Lists parameters that should not be modified to prevent machine damage.
Describes how to start/stop the machine using digital inputs and related parameters.
Details on controlling speed using fixed frequencies and digital inputs.
Methods for controlling speed using analogue signals from internal potentiometer or external inputs.
Configuration and setup for PID pressure control using analogue inputs.
Table explaining the meaning of different LED indicator states for diagnostics.
A list of common error messages, their descriptions, and possible causes/remedies.
