EasyManua.ls Logo

BUSCH R5 KB 0010 E - User Manual

BUSCH R5 KB 0010 E
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Get technical data,
instruction manuals,
service kits
R5
Oil-Lubricated Rotary Vane Vacuum Pumps
KB 0010 E, KB 0016 E,
KC 0010 E, KC 0016 E
Instruction Manual
0870169526 | A0006_en-US | Original instructions 10/13/2022

Questions and Answers

  • A
    Anthony Bailey PhDAug 7, 2025
    Why does my BUSCH Water Pump run too hot?
    • A
      Amber CollierAug 7, 2025
      Your BUSCH Water Pump may be running too hot due to several reasons: insufficient cooling, high ambient temperature, low oil level, or partially clogged exhaust filters. To resolve this, remove any dust and dirt from the machine, ensure the ambient temperature is within the permitted range, top up the oil, and replace the exhaust filters if they are clogged.
  • R
    Rachel OliverAug 11, 2025
    What to do if my BUSCH Water Pump doesn't reach the usual pressure?
    • S
      Stephen MorrisAug 11, 2025
      If your BUSCH Water Pump isn't reaching the usual pressure, it could be due to several reasons. The oil level might be too low, so top it up. The inlet screen could be partially clogged, so clean it. If you have one, the inlet filter cartridge might be clogged, so replace it. If none of these steps work, internal parts may be worn or damaged.
  • J
    Jean RobinsonAug 16, 2025
    Why BUSCH Water Pump machine does not start?
    • D
      davidwilliamsAug 16, 2025
      If your BUSCH Water Pump machine isn't starting, it could be due to the motor not receiving the correct voltage. Check the power supply to ensure it's providing the appropriate voltage to the motor. If the power supply is correct, the motor may be defective.
  • M
    Mathew LopezAug 20, 2025
    Why does my BUSCH Water Pump fume or expel oil?
    • S
      Scott BowmanAug 20, 2025
      If your BUSCH Water Pump is fuming or expelling oil droplets through the gas discharge, it's likely that the exhaust filters are partially clogged. Replace the exhaust filters. Also, check the position of the exhaust filters and o-rings to ensure they are fitted properly.
  • C
    Candice HunterAug 25, 2025
    Why is the oil in my BUSCH Water Pump black?
    • M
      Mr. Robert ChambersAug 25, 2025
      The oil in your BUSCH Water Pump might be black because the oil change intervals are too long, or the inlet filter is defective. Replace the inlet filter. Also, the machine might be running too hot.
  • J
    John GillAug 29, 2025
    Why my BUSCH Water Pump runs very noisily?
    • D
      Daniel Sherman IIIAug 29, 2025
      If your BUSCH Water Pump is running very noisily, it could be due to stuck vanes or defective bearings.
  • T
    Thomas DavisSep 1, 2025
    Why is the oil emulsified in my BUSCH Water Pump?
    • P
      Pamela OwensSep 1, 2025
      The oil in your BUSCH Water Pump may be emulsified because the machine sucked in liquids or significant amounts of vapor. You can also clean the filter of the gas ballast valve. Consider modifying the operational mode.

BUSCH R5 KB 0010 E Specifications

General IconGeneral
BrandBUSCH
ModelR5 KB 0010 E
CategoryWater Pump
LanguageEnglish

Related product manuals