Transport | 3
Instruction Manual R5 KB KC 0010-0016 E_EN_en 7 | 32
3 Transport
NOTICE
In case the machine is already filled with oil.
Tilting a machine that is already filled with oil can cause large quantities of oil to ingress into
the cylinder. Starting the machine with excessive quantities of oil in the cylinder will immedi-
ately break the vanes and ruin the machine!
● Drain the oil prior to every transport or always horizontally transport the machine.
● To find out the weight of the machine, refer to the chapter Technical Data [➔25] or the name-
plate (NP).
● Check the machine for transport damage.
If the machine is secured to a base plate:
● Remove the machine from the base plate.
To Next Page
Loading...
