Troubleshooting | 12
Instruction Manual R5 KB KC 0010-0016 E_EN_en 23 | 32
12 Troubleshooting
DANGER
Live wires.
Risk of electrical shock.
● Electrical installation work must only be executed by qualified personnel.
CAUTION
Hot surface.
Risk of burns!
● Prior to any action requiring touching the machine, let the machine cool down first.
Illustration showing parts that may be involved during troubleshooting:
Description
IS Inlet screen GB Gas ballast valve
EF Exhaust filter
Problem Possible Cause Remedy
The machine does not start. The motor is not supplied with
the correct voltage.
● Check the power supply.
The motor is defective. ● Repair the machine (contact
Busch).
To Next Page
Loading...
