EU Declaration of Conformity | 15
Instruction Manual R5 KB KC 0010-0016 E_EN_en 27 | 32
15 EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Decla-
ration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the CE-marking.
The manufacturer Busch Výroba CZ s.r.o.
Svárovská 620
CZ 460 01, Liberec 11
declares that the machine: R5 KB 0010 E; R5 KB 0016 E; R5 KC 0010 E; R5 KC 0016 E
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ (EMS) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable amend-
ments)
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009 Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Liberec, 16.04.2021
Michael Dostalek
General Manager
To Next Page
Loading...
