BUSCH R5 0063 E User Manual

INSTALLATION
AND
OPERATION MANUAL
R 5 Series
Models 0025, 0040, 0063, 0100, 0101 and 0250 C/E
Single Stage Rotary Vane Vacuum Pumps

BUSCH R5 0063 E Specifications

General

Gas ballast	yes
Max Flow Rate	Not applicable
Max Head	Not applicable
Weight	98 kg
Protection Class	IP 55

Summary

2.0 OPERATION

2.1 Start-up

Steps for safely starting the vacuum pump after installation and oil filling.

3.0 ROUTINE MAINTENANCE

3.1 Pump Oil

3.1.1 Oil Level

3.1.2 Oil Type and Quantity

3.1.3 Oil and Filter Change

Instructions for changing the pump oil and associated filters.

3.2 Automotive-Type Oil Filter

3.3 Exhaust Filter

3.6 Routine Maintenance Schedule

A schedule outlining daily, weekly, and periodic maintenance tasks.

4.0 TROUBLESHOOTING

4.1 Trouble (Pump does not reach "blank-off" pressure)

Diagnosing and resolving issues with the pump failing to achieve ultimate vacuum.

4.2 Trouble (Pump will not start)

Troubleshooting steps for a pump that fails to initiate operation.

4.3 Trouble (Pump starts, but labors and draws a very high current)

Addressing problems where the pump starts but operates with excessive load.

4.4 Trouble (Pump discharges smoke at the exhaust port or expels oil droplets from the exhaust)

Resolving issues related to smoke or oil discharge from the pump exhaust.

4.5 Trouble (Pump runs very noisily)

4.6 Trouble (The pump runs very hot)

Diagnosing and rectifying overheating issues in the vacuum pump.

4.7 Trouble (Pump is seized)

Troubleshooting steps for a pump that has become mechanically seized.

4.8 Trouble (Automotive-type oil filter does not get warm within two to five minutes when cold pump is started)

Technical Data