Care and Maintenance
Changing the stylus
1. Ensure the tone arm is secured by the clip
2. Insert a tip of a small screwdriver as shown and gently push in a downward
direction
3. Remove the old stylus (fig.7)
4. Hold the tip of the new stylus, align the guide pins as shown and clip into
position (fig 8)
Caring for the turntable
Wipe external surfaces with a soft cloth. If the case is very dirty, unplug
from the mains supply and use a damp cloth soaked in a weak solution of
washing up liquid and water. Allow to dry thoroughly before reusing
Caring for records
Hold records by the label or edges (fig 9). Oils from clean hands can leave
a residue on the record surface that will gradually deteriorate the quality of
your record
Keep in a cool, dry place and store records in their sleeves and jackets
when not in use
Store records upright (on their edges). Records stored horizontally will
eventually bend and warp
Do not expose records to direct sunlight, high humidity and high
temperatures. Long exposure to high temperatures will warp the record
Should the record become dirty, gently wipe the surface in a circular motion
using a soft anti-static cloth(fig. 10) suitable for this application
Fig 6
Fig 7
Fig 8
12
W ood en Turntable W ith L eg s Instruction Manual
To Next Page
Loading...