Why is my Bush BR20DAB reception so poor?
Poor radio reception can occur if the radio aerial signal is weak, potentially due to electrical interference from devices like TVs, video recorders, or computers. To improve reception: * Re-position the radio and aerial. * Extend the antenna rod to its full length. * Move the unit away from other electrical equipment.
What to do if my Bush BR20DAB Radio has no sound?
If your Bush Radio produces no sound, there are a few potential reasons: * The volume may be set too low, so try turning it up. * Headphones might be connected; if so, disconnect them. * The main power cord may not be properly connected. Ensure it is firmly plugged into both the radio's AC/DC socket and the wall outlet.
What to do if Bush BR20DAB Radio button functions are not responding?
If the buttons on your Bush Radio aren't responding, it might be due to electrostatic discharge. To resolve this, turn off the unit, disconnect the mains power cord, wait a few seconds, then reconnect the power cord and turn the unit back on.
Emphasizes the importance of reading safety instructions before operation.
Provides warranty contact numbers for Australia and New Zealand.
Details precautions for cable placement, environment, children, ventilation, and liquids.
Instructions for cleaning the unit and when to seek professional servicing.
Identifies and describes the function of all external buttons, knobs, sockets, and the antenna.
Guide on connecting power, using headphones, batteries, and AUX input.
Instructions for switching on/off, adjusting volume, using bass boost, and performing initial station scans.
Details on using the menu for full scans, manual tuning, and signal strength adjustment.
Instructions for changing stations, storing presets, and recalling saved stations.
Adjusting DRC for audio compression and removing unwanted stations from the list.
Accessing and modifying system settings like Time, Backlight, and Factory Reset.
Guide to switching to FM mode, automatic/manual tuning, and storing FM presets.
Configuring scan behavior and audio output (mono/stereo) for FM stations.
Details on system settings such as Time, Backlight, Factory Reset for FM mode.
Addresses common issues like no sound, unresponsive buttons, and poor reception.
Lists key technical details including power, output, and frequency ranges.
Details the warranty period, coverage limitations, and conditions for validity.
To Next Page
General
